Window Replacement Cost by Frame Material

Frame material alone can move a per-window price by more than a thousand dollars. Here's what each one runs.

Updated

Material is the biggest lever on the price tag

Before window count, style or glass upgrades enter the picture, frame material sets the floor and ceiling of what a window will cost. National pricing from Fixr's 2026 data puts installed per-window costs at $200 to $800 for aluminum, $350 to $800 for vinyl, $400 to $1,500 for fiberglass, $600 to $2,000 for wood, and $300 to $2,500 for composite.[1]

HomeAdvisor's June 2026 update reports single average figures rather than ranges, and they land higher across the board: $450 for aluminum, $550 for vinyl, $900 for composite, $1,100 for fiberglass and $1,250 for wood.[2]

The two sources don't agree on an exact number, which is normal for cost guides pulling from different contractor samples. What they agree on is the order: aluminum and vinyl sit at the affordable end, wood and fiberglass sit at the top, and composite spans nearly the whole range depending on the product line.

Aluminum: the low end, with tradeoffs

Aluminum is the least expensive frame material in both cost guides, but it's also the weakest insulator of the five, which is why it shows up more often in mild climates or on commercial-style openings than as a first choice for an energy-focused replacement.[1],[2]

Vinyl: the volume choice

Vinyl's $350 to $800 range is the tightest spread of the five materials, which tracks with it being the most commonly installed replacement window frame in the country. It doesn't need painting and holds up well across a wide range of climates, which is likely why cost guides treat it as the baseline everyone else gets compared to.[1]

Fiberglass and composite: priced like a spread, not a number

Fiberglass's $400 to $1,500 range and composite's $300 to $2,500 range are both wide because these categories cover everything from entry-level product lines to premium ones built to outperform vinyl on strength and thermal stability. A quote at the bottom of either range and a quote at the top can both be accurate; they're just different tiers of the same material.[1]

Wood: the top of the range, for a reason

Wood's $600 to $2,000 range, and HomeAdvisor's $1,250 average, make it the most expensive standard frame material in both sources. Wood is also the material with the longest track record for looks and repairability, which is part of what buyers are paying the premium for, not just the raw material cost.[1],[2]

Use the material range, not a single number, to budget

Because both sources report a spread this wide inside a single material, treat any one figure as a starting point rather than a target. Run your own window count through the calculator on this site to see a range adjusted for local labor cost, then get an actual quote for your specific product line before you set a budget.

Questions people ask

Which material is cheapest to replace like-for-like?

Vinyl and aluminum sit at the lower end of both cost guides, with vinyl offering better insulation for a similar starting price.[1]

Does a more expensive material always mean better energy performance?

Not directly. Material affects durability and looks more than it guarantees a specific U-factor; the glass package matters as much as the frame for energy performance.

Can I mix materials in the same house?

Yes, and plenty of homeowners do, choosing a tougher material like fiberglass or composite for street-facing rooms and vinyl for the rest of the house to manage the total bill.

Why do two composite windows from different brands price so differently?

Composite covers a wide range of actual products, from entry-level lines built mainly for cost to premium lines engineered to outperform wood, which is why its national range runs $300 to $2,500 instead of a tight band.[1]

Sources

  1. How Much Does Window Replacement Cost? [2026 Data], Fixr, accessed 2026-09-30
  2. What Is the Average Cost to Install Windows?, HomeAdvisor, accessed 2026-09-30